Connecting External Devices; Ports On The Device - Fujitsu CELSIUS W550 Operating Manual

Connecting external devices

Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug when disconnecting a cable. Never pull the cable!

Ports on the device

Externaldevices Device Ports
The ports are located on the front and back of the device. Not all ports are necessarily present on
your device. The standard ports are marked with the symbols shown below (or similar). Detailed
information on the location of the ports is provided in the manual for the mainboard.
PS/2 keyboard port
Keyboardport
Serial port 1
1
Serialport
VGA monitor port
Monitorport
Headphones
Headphones
Audio output (Line out)
Lineout Audiooutput
USB 2.0 - Universal Serial Bus
UniversalSerialBus
USB 3.0 - Universal Serial Bus
UniversalSerialBus
DVI-I monitor port
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
Fujitsu
Parallel port/printer (optional)
Printer Parallelport
Serial port 2
2
Serialport
Microphone port
Microphonejack
Audio input (Line in)
Audioinput Linein
PS/2 mouse port
PS/2mouseport Mouseport
LAN port
LAN
LANport
SCSI connection
DP DisplayPort
Getting started
15