Connecting A Monitor; Connecting The Mouse; Connecting The Keyboard - Fujitsu ESPRIMO P556 Operating Manual

Getting started

Connecting a monitor

► Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor
► Connect the data cable of the monitor into the monitor port of your device.
The optional monitor power cable may only be connected to the monitor socket of
the device if the monitor current consumption is less than 1 A with 240 V or 2 A
with 100 V. The values for the monitor current consumption can be found in the
technical data on the monitor or in the operating manual for the monitor.
► Plug the monitor power cable into the grounded mains outlet.

Connecting the mouse

You can connect a USB mouse or a PS/2 mouse to your device.
Mouse, Connecting,
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
USBport, USBport
Connecting a PS/2 mouse
The PS/2 mouse is only detected by the device if you connect the mouse when
the device is switched off and then switch the device on again.
► Connect the PS/2 mouse to the PS/2 mouse port of the device.
PS/2mouse, PS/2mouse, Connecting,
► Switch your device on again.

Connecting the keyboard

You can connect a USB keyboard or a PS/2 keyboard to your device.
Keyboard, Connecting,
Connecting a USB keyboard
Use the supplied keyboard cable only.
USBport, Connecting,
► Insert the flat rectangular USB plug of the keyboard cable into one of the device's USB ports.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
Connecting, ConnectingaPS/2keyboard
The PS/2 keyboard is only detected by the device if you connect the keyboard
when the device is switched off and then switch the device on again.
► Switch your device off.
► Plug the round plug of the keyboard cable into the keyboard port on the device.
Keyboard,
► Switch your device on again.
14 Fujitsu