LG LST-3410A Service Manual page 38

10) Factory Set/Init
- This mode performs the factory setting for HDD, EEPROM, Gemstar Board, and so on at the time of the final
shipment.
- The final shipment setting is as follows:
1) Delete the HDD area, but not the demo data
2) Set the EEPROM to the following values.
--> Channel Map => clear
--> Favorite Channel => clear
--> Volume => 100
--> Last Channel => TV-2
3) Initialize Gemstar => Initialize the Gemstar Board.
< Fig17 > Factory Set/init
3-26