Table of Contents
Advertisement
T-4555P_En.book Page 19 Wednesday, August 9, 2006 3:42 PM
Turning On and Listening to AM and FM Radio
STANDBY/ON
STANDBY indicator
STANDBY/ON
BAND
Turning On the T-4555P
1
Connect the power cord to a suit-
able wall outlet.
2
Press the [STANDBY/ON] button
on the T-4555P or remote con-
troller.
The T-4555P turns on, and the
STANDBY indicator goes off.
Remote controller
To turn off the T-4555P, press the
[STANDBY/ON] button. The T-4555P
will enter Standby mode.
Note that the T-4555P is not com-
pletely shutdown in Standby mode.
TUNING/CH
TUNING MODE
BAND
TUNING/CH
/
TUNING MODE
Listening to AM and FM Radio
1
Press the [BAND] button repeat-
edly to select AM or FM.
The
or
Remote controller
2
Press the [TUNING MODE] but-
ton repeatedly to select Auto or
Manual Tuning mode.
•
Auto Tuning Mode
The AUTO indicator appears and
stereo radio reception is possible.
Remote controller
•
Manual Tuning Mode
The MONO indicator appears and
radio reception will be in mono.
MONO indicator
Note:
The MONO indicator does not light up
if the installed tuner board supports HD
Radio technology.
•
Auto Tuning Mode
The AUTO indicator appears.
•
Manual Tuning Mode
AUTO indicator disappears.
3
Use the TUNING/CH [
tons to tune into a station.
In Auto Tuning mode, once a station is
found, tuning stops automatically.
The American model changes FM fre-
quency in 0.2 MHz steps, 10 kHz steps
Remote controller
for AM.
For other models, it's 0.05 MHz steps
for FM and 9 kHz or 10 kHz steps for
AM.
In Manual Tuning mode, the frequency
stops changing when you release the
buttons. Press the buttons repeatedly to
change the frequency one step at a time.
indicator lights up.
AUTO indicator
]/[
] but-
19
Advertisement
Table of Contents
