Operation; Using Intelligent Tracking - Bosch MIC-71 series Operation Manual

MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
13

Operation

13.1

Using Intelligent Tracking

Configuring Intelligent Tracking
The camera utilizes the built-in Intelligent Video Analytics (IVA) to continuously follow an
individual or object even if it passes behind a Privacy Mask or a stationary object. The camera
uses objects detected by IVA in a stationary preset position to activate the Intelligent Tracking
feature.
The Intelligent Tracking feature allows continuous on-screen following of an individual or an
object. This feature operates by recognizing an object in motion and zooms in to
approximately 50% (default Tracker zoom threshold) of the field of view for an average target
height of six feet. This feature controls the pan/tilt/zoom actions of the camera to keep the
selected object in the scene.
To activate the Intelligent Tracking feature, one of the following conditions must be met:
–
–
Notice!
The following actions occur if Intelligent Tracking is active:
All other IVA objects are disabled in scenes with Intelligent Tracking.
The camera automatically disables the display of compass headings. Once Intelligent Tracking
is set to Off, the camera resumes display of the compass heading. Refer to PTZ Settings, page
27 for details of the Compass feature.
Guidelines for Implementing Intelligent Tracking
Factors such as the viewing angle and unwanted motion (from trees, for example) may
interfere with Intelligent Tracking operation. Use the following recommendations to ensure
smooth Intelligent Tracking operation:
–
–
–
Bosch Security Systems
The Silent IVA option must be selected in the VCA page on the Settings tab. Refer to VCA,
page 41.
IVA must be active for at least one preset scene in the VCA page on the Settings tab. If
IVA is configured for one scene, then all other scenes have Intelligent Tracking enabled by
default. If a scene has Motion+ of IVA Flow activated, however, then Intelligent Tracking is
disabled for these scenes.
Mount/Mounting Surface Stability
– Mount the camera in the most stable position. Avoid locations affected by vibrations,
such as those caused by a roof-top air conditioner. These vibrations may cause
complications when the camera zooms-in on a target.
– Use the pendant arm mount, if possible. This mount option provides the most
stability for the camera.
– Use guy wires to protect against strong winds if using the parapet mount.
Field of View
– Select a location and viewing angle that allows the flow of people to move across the
camera's field of view.
– Avoid motion that moves directly towards the camera.
– Avoid locations that attract large numbers of people, such as retail stores or
intersections. Intelligent Tracking is optimized for scenes with very few moving
objects.
Unwanted Motion
Operation Manual
Operation | en 63
2016.02 | 4.0 |