Kenwood DDX7015 Service Manual page 20

DDX7015/7025/7035
DDX7045/7065
Test mode Main
Information
Service
Chroma
Touch
MECHA ADJ
• Key specification
Information : Change to Information screen
Service : Change to service information screen
Chroma : Change to Chroma adjustment screen
Touch : Change to Panel Touch adjustment screen
MECHA ADJ : Change to Mechanims adjustment screen
Hposi : Change to horizontal position adjustment screen
Source : Change to source screen
Setup : Change to setup screen
Audio : Change to audio screen
Information screen
Display for microprocessor, serial number and DVD region code
information.
Serial : x x x x x x x x
System u-com
Ver : 4. XXX ROM : R – – –
OSD ROM Ver : 1. 03
Region :
*
B/E Ver : 2. 09
Box u-com
Ver : 4. XXX ROM : R – – –
Span : –
• Key specification
Return : Change to Test Mode Main screen
20
TEST MODE
Hposi
Source
Set Up
Audio
Type :
*
F/E Ver : 4. 02
Type :
*
Return
Service information screen
Display of service information data and initialization for the
unit.
Initialized Chroma adjustment data.
Display of DC offset voltage detect information. (for audio power
amp)
Init Power On
DVD Play
Init
DVD Eject
Init
Mon. Open
Init
Init Mon. Close
Start
• Key specification
Init : Select for initialization item
START : Initialization data when while pressing and holding
about 2 second any more.
SERIAL : Change to Serial number input screen
CLEAR : EEPROM data cleared.
RTN : Change to Test Mode Main screen
• Adjustments procedure
1) Select for Init key when you wont initialized data.
2) While pressing and holding START key about 1 second any
more.
3) DC offset information
DC offset detect information for the display
None : Not detected (normal), Detect : Detected
4) Initialized DC offset information
While pressing and holding the Eject key and Volume down
key, reset the unit.
hour Serial
***
hour
Chroma
***
Ready
time
Clear
***
time
***
DCOffset
time None
***
Return