First Time Setup; Automatic Speaker Setup (Audyssey 2Eq/Htib) - Onkyo HT-R550 Instruction Manual

First Time Setup

This section explains the settings that you need to make before using the AV receiver for the very first time.

Automatic Speaker Setup (Audyssey 2EQ/HTIB)

With the supplied speaker setup microphone, the Audyssey 2EQ/HTIB function can measure the number of speakers
connected, their sizes, crossover frequencies, and distances from the listening position, and then calculate the optimal
speaker settings for your listening environment.
Before using this function, connect and position all of the supplied speakers.
Measurement Points
To create a listening area in which several people can enjoy home theater simultaneously, the Audyssey 2EQ/HTIB
function takes measurements at three points within the listening area:
A
First measurement point
This is the center point of the listening area, or the listening position if it's just one person.
B
Second measurement point
The right side of the listening area.
C
Third measurement point
The left side of the listening area.
The distances between points
From the examples below, choose the listening area that best matches yours and place the microphone accordingly when
prompted.
TV
TV
TV
1 2 1
and and points and
:
Listening area
:
Listening position
3
must be at least 1 meter.
TV
TV
TV
TV
TV
TV
37