Onkyo DV DV-BD507 Instruction Manual page 43

■
Others
Others
Angle Icon
Auto Power Off
Panel Display
HDMI CEC
Media Select
Network Connection
Software Upgrade
•
For how to select the setting items and options, refer to "Custom" on page 34.
Setting items
Angle Icon
Auto Power Off
Panel Display
Sets the brightness of the
front panel display.
HDMI CEC
Sets whether to utilize
HDMI CEC function.
Media Select
Selects the media to
playback.
Setting will be back to
"Disc" when you turn the
unit to the standby mode.
Network Connection
EN
FUNCTION SETUP
On
On
Auto
On
Disc
Enable(Easy)
On*:
The angle icon appears on the TV screen when playing back the scene with various
angle.
Off:
The angle icon disappears on the TV screen.
On*:
If this unit is left with no activity for more than 30 minutes, this unit turns into the
standby mode automatically.
Off:
Sets off the auto power off.
Auto*:
Front panel display gets darker during playback.
Bright:
Front panel display gets brighter.
Dimmer:
Front panel display gets darker.
On*
Off
Disc*:
Select this when you play back a disc.
SD Card:
Select this when you play back an SD Memory Card.
Connection
Test
Enable(Easy)*
Enable IP Address
(Custom) Setting
DNS
Setting
Options
Auto(DHCP)*
Manual IP Address
Subnet Mask
Default
Gateway
Auto(DHCP)*
Manual Primary DNS
Secondary
DNS
Perform the network connection
test. After you change the IP
address or DNS setting, always
perform this test.
If you select "Enable(Easy)",
Connection test will automatically
start.
Set the IP address.
In most cases, you can connect
to the Internet without making
any changes to the default
setting.
Set the DNS setting.
In most cases, you can connect
to the Internet without making
any changes to the default
setting.
43