JVC GR-D760EK Instructions Manual page 31

To Print By Selecting Still Images And
Number Of Prints
1
Perform steps 1 – 3 in "To Print All Still
Images (One Print For Each)".
2
Select "CURRENT",
press SET or . The
DPOF screen appears.
3
Press or to select
the desired file.
4
Press or to select the
number indication (00), and press
SET.
5
Select the number of
prints by pressing
increase the number, or
to decrease the number,
and press SET.
● Repeat steps 3 through 5
for the desired number of
prints.
● The number of prints can be set up to 15.
● To correct the number of prints, select the image
again and change the number.
6
Select "RETURN",
press SET. The "SAVE?"
appears.
● If you did not change any
settings in step 3 through
5, the
DPOF
Menu
reappears.
7
Select "EXECUTE", press SET.
● To cancel selection, select "CANCEL".
pg. 30)
(
DPOF
SHEETS
02
RETURN
Select
Select
1
2
DPOF
to
SHEETS
02
DPOF
SAVE?
EXECUTE
CANCEL
ADDITIONAL FEATURES FOR D.S.C.
To Reset The Number Of Prints
1
Perform steps 1 – 3 in "To Print All Still
Images (One Print For Each)".
2
Select "RESET", press SET or
screen appears.
3
Select "EXECUTE", press SET.
● To cancel selection, select "RETURN".
● The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
NOTE:
When the image is printed from the printer, a black
bar appears at the bottom of the screen. This is not
a malfunction. By recording with "DIS" de-activated
( pg. 30) this can be avoided.
SET
31
EN
pg. 30)
(
. The DPOF