Declaration Of Conformity - Onkyo CR-505 Instruction Manual

Precautions— Continued
This unit contains a semiconductor laser system and is
classified as a "CLASS 1 LASER PRODUCT." So, to
use this model properly, read this Instruction Manual
carefully. In case of any trouble, please contact the store
where you purchased the unit. To prevent exposure to
the laser beam, do not try to open the enclosure.
DANGER:
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK FAILED OR
DEFEATED. DO NOT STARE INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARD-
OUS RADIATION EXPOSURE.
This label is located on the side of the unit. It indicates
that:
1. This unit is a CLASS 1 LASER PRODUCT and
employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not
remove the cover. Refer servicing to qualified per-
sonnel.
4

Declaration of Conformity

We, ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding technical standards such as EN60065,
EN55013, EN55020 and EN61000-3-2, -3-3.
GROEBENZELL, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
Memory backup
The CR-505 uses a battery-less memory backup system in
order to retain radio presets and other settings when it's
unplugged or in case of a power failure. Although no batter-
ies are required, the CR-505 must be plugged into an AC
outlet in order to charge the backup system.
Once it has been charged, the CR-505 will retain the set-
tings for several weeks, although this depends on the envi-
ronment and retention will be shorter in humid climates.
The clock setting is not retained by the backup system.
I. MORI