Powering Up And Setting The Clock; Powering Up The Cr-505; Accuclock Function; Standby Indicator - Onkyo CR-505 Instruction Manual

Powering Up and Setting the Clock

STANDBY / ON
PHONES INPUT MENU
STANDBY/ON

Standby indicator

Powering Up the CR-505

Before connecting the power cord, complete all connections
(see pages 11 to 15).
1
Connect the power cord to a suitable wall
outlet.
The CR-505 enters Standby mode, and the Standby
indicator comes on.
2
To turn on the CR-505, press the
[STANDBY/ON] button.
The CR-505 comes on, the display lights up, and the
Standby indicator goes off.
To turn off the CR-505, press the [STANDBY/ON]
button again. The CR-505 enters Standby mode and the
Standby indicator comes on.
16
VOLUME
MIN MAX
PRESET
BASS TREBLE
DIRECT
PUSH TO ENTER
If you are using any model other than the European, please
skip to "Setting the Clock Manually" on page 18.

ACCUCLOCK Function

(for European models only)
STANDBY/ ON
2
1
5
4
8
7
--/---
CLEAR
10/0
DISPLAY
DISPLAY MODE
SLEEP
MUTING
CD
The very first time you turn on the CR-505, the ACCU-
CLOCK function automatically sets the clock by using the
CT (Clock Time) information present in RDS radio broad-
casts.
While the clock is being set, "WAIT" appears on the dis-
play, as shown. It may take a while to set the clock.
When the clock has been set, "ADJUSTED" appears on the
display for a while.
Use the [CLOCK CALL] button to check if the clock has
been set correctly.
If the clock has not been set correctly, see "Setting the
Clock Manually" on page 18.
The ACCUCLOCK function automatically calibrates
the clock daily at 2 AM, 3 AM and 2 PM.
If ACCUCLOCK does not stop:
When the radio reception is not good, the ACCUCLOCK
function may not end. To force the ACCUCLOCK function
to end, press the [DISPLAY] button. In this case, set the
clock manually.
If the wrong day or time appears on the display:
If you live close to the border with another country, the CT
information may have been taken from a radio station in
another time zone. In this case you should specify another
station and try setting again (see "Setting ACCUCLOCK to
Use a Specific Station" on page 17).
CLOCK CALL
CLOCK
CALL
3

TIMER

TIMER
6
9
ENTER
ENTER
REPEAT
INPUT
DIRECT