Canon WX450ST User Manual page 190

Completing Computer Settings
Item
SNMP
Receive community
Password
Confirm password
Setting Projector Information [Projector info.]
From [Projector info.] in the settings screen, you can set the names and location
names which are used to identify projectors when multiple projectors are installed
on the network. For the setting procedure, refer to "Displaying the Network
Configuration Screen" (P181).
Item
Projector name
Location
Some characters such as # cannot be used for [Projector name] and [Location].
Downloaded From projector-manual.com Canon Manuals
Explanation
Select the SNMP function version. If
OFF is selected, the SNMP function
will be turned off and the other
settings in this screen cannot be
changed.
Enter the community name which will
receive projector information in 1-byte
alphanumeric characters and symbols
(1 - 15 characters).
Enter the community settings
password in 1-byte alphanumeric
characters and symbols (8 - 15
characters). It can be set only when
the SNMP version is V3.
For confirmation, enter the same
password as you entered in
[Password].
Explanation
Enter the projector name in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
Enter the projector installation location
in 1-byte alphanumeric characters and
symbols (0 - 63 characters).
190
Factory default setting
OFF
<Blank>
<Blank>
<Blank>
Factory default setting
Canon Projector001
<Blank>