Canon WX450ST User Manual page 160

Installation-Related Menu Settings
Here, you can use the following settings in the edge blending menu.
Off
Adjust
• If you have already completed edge blending settings, selecting [Adjust] will apply
them.
• To restore the default settings before adjustment, select [Reset].
3
Select the position where the images overlap.
When you are adjusting the left image, this area is along the right edge of the
image. In the edge blending window, select [Right] > [Adjust].
Left image
Overlapping area
4
Set [Marker] to [On].
Marker lines are projected on the images. The red marker indicates the start
position for adjustment, and the green marker, the end position.
By default, the green and red markers are displayed in the same position, so only the red
marker is visible.
Downloaded From projector-manual.com Canon Manuals
Left, Right, Top, Bottom
Off
Adjust Marker
Start position
Width
Reset
Black level adjustment
Reset
Right image
Does not blend overlapping areas.
Displays the menu for blending overlapping
areas.
Projects an image with no correction.
Off Hides the markers.
On Displays markers showing the adjustable
blending area, with one line indicating the start
position (in red) and another, the end position (in
green).
Moves the marker for the start position.
Specifies the width between the start and end
markers.
Resets the marker settings.
Adjusts the black level of non-overlapping image
areas. (P162)
Resets any adjustments you have made.
160