Tips For Cleaning And Maintenance; How To Assemble / Open The Highchair; Linings; Safety Harness - Chicco POLLY MAGIC Instructions For Use Manual

up- Z. Wheel
the AA.Front legs
BB.Booster cushion
or- CC.Toy bar
air DD.Basket
rap

TIPS FOR CLEANING AND MAINTENANCE

the The cleaning and maintenance of the highchair must only be carried
ild. out by an adult.
Cleaning
Clean the fabric cover with a soft damp cloth or a neutral detergent.
fit
to To remove the fabric cover from the highchair repeat, in the reverse
order, the operations described to fix the fabric cover to the frame.
ust
Only use water and a soft damp cloth to clean the plastic parts of
ock the product
ven Do not use abrasive detergents or solvents.
If the highchair comes into contact with water, dry the metal parts
ce. to prevent the formation of rust.
Maintenance
Keep the highchair in a dry place.
or
To avoid friction that may prevent the correct operation of the
Highchair, ensure that all the movable plastic parts located along
ng the metal frame are free from dust, dirt or sand.
Lubricate only if necessary, with a light application of a silicone
he
based lubricant between the components
or- Booster cushion:
The booster cushion is made from washable material; please follow
the washing instructions carefully to protect the fabric:
the
ces
s.
gs,
Wash by hand in cold water
of
ok-
Do not bleach
the
op-
Do not tumble dry
me,
ro-
Do not iron
to
way
Do not dry clean
the
WARNING: Check that the fabric and stitching are in good condi-
tion each time you wash it.
WARNING: Prolonged exposure to direct sunlight can cause the
fabric to fade.
Outer cover: 100% polyester
Padding: 100% polyester

HOW TO ASSEMBLE / OPEN THE HIGHCHAIR

WARNING: when opening the highchair, ensure that your child, or
other children, are at a safe distance. Ensure that during these opera-
tions, the movable parts of the highchair do not come into contact
with your child.
1. Fix the legs to the highchair frame as shown in diag. 1
WARNING: the ends of the front and rear legs have a different shape
to avoid errors in the assembly phase.
Rear legs: keep the two locking buttons, located at the base of the
frame, pressed down and insert the legs into the structure. The parts
are locked only when the two locking buttons come out from the
holes on the legs, and an audible click is heard, signalling that the
legs are securely fitted
Front legs: keep the two locking buttons located at the base of the
frame pressed down and insert the legs. The parts are locked only
when the two locking buttons come out from the holes on the legs,
and an audible click is heard, signalling that the legs are securely
fitted (Diag. 1A)
2. Stand at the back of the highchair and hold the two side joints,
then press the open / close buttons (diag. 2). At the same time, open
the Highchair legs using your foot, until an audible click is heard,
signalling that the legs are locked in the open position (diag. 2A).
3. Raise the seat: hold the upper part of the backrest and pull it up-
ward, until the desired height is reached (diag. 3). The Highchair can
be adjusted to 6 height positions.
4. Use the adjuster buttons on the sides (diag. 4) to open the leg
rest (diag. 5).
5. Lower the armrests by pressing the two buttons located at the
rear of the armrests (diag. 6)
WARNING: The armrests must always be maintained in a horizontal
position. The armrests can be maintained in a vertical position only
when closing the Highchair.
6. Fix the fabric covers to the Highchair frame:

LININGS

A. Fit the fabric cover to the Highchair frame by sliding the safety
harness and D-Rings into the appropriate loops (diag. 7A).
B. Fit the upper fabric cover to the Highchair frame by sliding the
safety harness and D-Rings in the appropriate loops.
C. If the baby chair is to be used for smaller children, you can fit the
soft booster cushion onto the seat by sliding the fastener straps
through the appropriate loops (diag. 7B).
D. Slide the lap belt through the D-Rings, slide the crotch strap
through the hole and insert the clips into the buckle (diag. 7C)
E. Fit the spring catches (diag. 7D).
The Highchair covers are padded, and can be removed and washed.
To remove the fabric cover from the highchair repeat, in the reverse
order, the operations described to fix the fabric cover to the frame.
The same operations carried out for the upper padding must be car-
ried out also for the lower padding.
WARNING: never use the highchair without the fabric cover.
WARNING: never use the Highchair only with the upper fabric cover
or with the padding fitted to the frame in the reverse order.
7. Insert the footrest, turn it until the use position is reached, and
lock it in place (diag. 8). The footrest can be adjusted to 3 positions.
The child can now be seated in the Highchair:
8. Fit the rigid crotch strap to the activity tray (diag. 9).
9. WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always fit
the rigid crotch strap to the activity tray before fitting the tray to
the Highchair. Once the rigid crotch strap has been fixed, it must
never be removed.
The activity tray can now be fitted to the Highchair.

SAFETY HARNESS

WARNING: The use of the safety harness and fabric crotch strap is
necessary to guarantee the safety of your child.
WARNING: the activity tray alone does not guarantee the safety of
your child. Always use the SAFETY HARNESS!
The highchair has a 5-point safety harness.
10. Release the safety harness (diag. 10)
11. Place the child in the highchair and fasten it with the safety har-
ness (diag. 11)
The safety harness can be adjusted to two height positions.
FITTING / ADJUSTING THE ACTIVITY TRAY
12. WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always
fit the rigid crotch strap to the activity tray before fitting the tray
to the Highchair. Once the rigid crotch strap has been fixed, it must
never be removed.
The activity tray can be adjusted to 4 positions.
13. Hold the activity tray in your hands (diag. 12).
14. Insert the armrests in the guides located under the activity tray
while simultaneously pressing the side locking button (diag. 13).
15. Move the activity tray until the desired position is reached and
release the button. If the activity tray is not automatically locked on
the armrests, move the activity tray until a click is heard, signalling
that the tray is locked. WARNING: Always ensure that the tray is
locked correctly to the armrests before use. Attention: The activity
tray can only be adjusted to the 4 indicated positions.
WARNING: never leave the tray fitted in a position in which the dan-
ger signs are visible on the armrests: IT IS NOT safe!
16. To remove the tray, press the side buttons under the tray.
When not in use, the tray can be stored away at the rear of the frame
(diag. 14).
17. The Highchair has an activity tray cover. This can be fixed / re-
17