One for All URC-7562 Owner's Manual page 16

Setting up the Home Theater key
Example: To set up the key pad like this
Key Group
Group 1
Group 2
Group 3
Group 4
Group 5
1 Press HOME THEATER.
2 Press and hold MAGIC until a device key blinks twice (the device
key will blink once then twice).
3 Press 9 7 9.
4 Press the Play key (Group 1 will be selected).
5 Press the DVD key (the DVD key blinks twice).
6 Press the Volume (+) key (Group 2 will be selected).
7 Press the AUD key (the AUD key blinks twice).
8 Press the Channel (+) key (Group 3 will be selected).
9 Press the TV key (the TV key blinks twice).
10 Press the number 1 key (Group 4 will be selected).
11 Press the TV key (the TV key blinks twice).
12 Press the Menu key (Group 5 will be selected).
13 Press the VCR key (the VCR key blinks four times). You will automa-
tically exit the HOME THEATER programming mode.
Now, whenever you press the HOME THEATER key:
The Play keys (Group 1) will control your DVD player.
The Volume keys (Group 2) will control your amplifier.
The Channel keys (Group 3) will control your TV.
The Number keys (Group 4) will control your TV also.
The Menu keys (Group 5) will control your Videorecorder.
If you do not complete a group entry within 10 seconds, the programming
will not be stored. You can exit the HOME THEATER programming mode
after completing a Group assignment by pressing MAGIC (the device key
blinks twice). Your ONE FOR ALL 6 will store the changes entered up to
that point.
16
To be controlled by
DVD
AUD
TV
TV
VCR
WWW.ONEFORALL.COM