Filling The Engine With Oil - Toro 02656 Operator's Manual

2. Attach the plastic clips to the grass-bag frame (Figure
5).
1
1. Plastic clips
3

Filling the Engine with Oil

No Parts Required
Procedure
Your machine does not come with oil in the engine.
Before starting the engine, fill the engine with oil.
Max. fill: 20 oz. (0.59 l), type: SAE 30 detergent oil with an
API service classification of SF, SG, SH, SJ, SL, or higher.
1. Remove the dipstick (Figure 6).
g018153
Figure 5
g018154
1. Full
2. Slowly pour oil into the oil-fill tube, wait 3 minutes,
and check the oil level on the dipstick by wiping the
dipstick clean and then fully inserting the dipstick into
the tube (Figure 6).
3. Fill the engine with oil until the engine oil level is
correct on the dipstick, as shown in Figure 6.
Note: If you overfill the engine with oil, remove the
excess oil as directed in Changing the Engine Oil (page
15).
4. Install the dipstick and tighten it securely.
Important: Change the engine oil after the first 5
operating hours ; change it yearly thereafter; refer
to Changing the Engine Oil (page 15).
8
1
0.15 L
2
Figure 6
2. Add