Setup
Important: Remove and discard the protective plastic
sheet that covers the engine.
1
Unfolding the Handle
No Parts Required
Procedure
WARNING
Assembling and unfolding the handle improperly
can damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when assembling and
unfolding the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Loosen the handlebar knobs (Figure 3).
1. Blade control bar
2. Hold the blade-control bar against the handlebar,
unfold the handlebar to the proper operating position,
then release the blade-control bar.
3. Tighten the handlebar knobs.
2
g018151
g018151
Figure 3
2. Handlebar knobs
2
Assembling the Grass Bag
No Parts Required
Procedure
1. Insert the frame into the grass bag, keeping the handle
above the grass bag (Figure 4).
1
1
1. Frame
7
2
g018152
Figure 4
2. Grass bag