Table of Contents
Advertisement
1
2
3
Electric-start model shown
1. Cables
2. Wiring harness
(electric-start model only)
2. Move the handle to the operating position
3. Install the handle knobs and tighten them firmly by
hand.
2
Installing the Recoil-Starter
Rope in the Rope Guide
No Parts Required
Procedure
Important: To start the engine safely and easily
whenever you use the machine, install the recoil-starter
rope in the rope guide.
Hold the blade-control bar to the upper handle and pull the
recoil-starter rope through the rope guide on the handle
(Figure
5).
g025928
Figure 4
3. Handle
(Figure
1. Recoil-starter rope
3
Filling the Engine with Oil
No Parts Required
Procedure
Important: Your machine does not come with oil in
the engine. Before starting the engine, fill the engine
with oil.
3).
1. Move the machine to a level surface.
2. Remove the dipstick
the crankcase capacity of oil into the oil-fill tube.
Note: Max. fill: 0.59 L (20 oz), type: 10W-30 or SAE
30 detergent oil with an API service classification of
SJ or higher.
3. Wipe off the dipstick with a clean cloth.
6
Figure 5
2. Rope guide
(Figure
6) and pour about 3/4 of
Figure 6
Advertisement
Table of Contents
