Sound Power; Hand/Arm Vibration; Safety And Instructional Decals - Toro 29730 Operator's Manual

The sound pressure level was determined according to the
procedures outlined in EN ISO 5395:2013.

Sound Power

This unit has a guaranteed sound power level of 98 dBA,
which includes an Uncertainty Value (K) of 1 dBA.
The sound power level was determined according to the
procedures outlined in ISO 11094.
CAUTION
Long-term exposure to noise while operating the
machine may cause some hearing loss.
Wear adequate hearing protection whenever you
operate the machine for an extended period of time.

Hand/Arm Vibration

Model 29730
Measured vibration level for right hand = 4.9 m/s
Measured vibration level for left hand = 4.2 m/s

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
1. Warning—read the Operator's Manual for information on charging the battery; contains lead; do not discard.
2. Read the Operator's Manual.
Uncertainty Value (K) = 2.5 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Models 29732 and 29734
Measured vibration level for right hand = 2.2 m/s
Measured vibration level for left hand = 1.9 m/s
Uncertainty Value (K) = 1.1 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
CAUTION
Long-term exposure to vibration while operating
the machine may cause some numbness in the
hands and wrists.
Wear gloves that dampen the vibration whenever
you operate the machine for an extended period of
time.
2
2
104-7953
4
2
2
2
2