Soil Settler Soil Removal System; Start-Up Guide; Using Your New Dishwasher - Kenmore 665.1421 series Use & Care Manual

The Soil Settler soil removal system cleans by spraying a
mixture of hot, clean water and detergent against soiled
dishes.
To clean the Soil Settler filter screen
1. Wait at least 20 minutes after a cycle for the heating
element to cool down.
2. Unload and slide the bottom rack forward. (Remove
bottom rack if necessary to reach filter screen.)
Before using your dishwasher, remove all packaging
materials. Read this entire Use and Care Guide. You will
find important safety information and useful operating tips.

Using Your New Dishwasher

1. Rinse aid is essential for good drying. Be sure to fill the
dispenser before you use your new dishwasher. Each
filling will last about 1 to 3 months depending on your
usage.
2. Scrape large food soil and hard items (toothpicks or
bones) from dishes.
3. Properly load the dishwasher. (See "Dishwasher
Loading.") Load dishes with space in between so water
will reach the soiled surfaces. Make sure nothing keeps
the spray arm(s) from spinning freely.
6

Soil Settler Soil Removal System

3. Remove collected particles from the screen with your
4. Replace the bottom rack with the rack bumpers facing
NOTE: Do not clean the dishwasher interior until it has
cooled.

START-UP GUIDE

4. Add detergent. Always use a high-quality brand
5. Push door firmly closed. The door latches
6. Select a drying option.
NOTE: Use No Heat Dry for the Quick Rinse cycle.
7. Press the desired cycle and option selections. (See
fingers or a paper towel.
the door.
detergent. (See "Dishwasher Use.")
automatically. Run hot water at the sink until water is
hot. (See "Dishwasher Efficiency Tips.") Turn off the
water.
"Dishwasher Use.") Turn the Cycle Control knob to the
desired cycle to start.