Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Use only with 4” or 4.5” angle grinders hazardous situation from Harbor Freight Tools. They guard which, if not avoided, will result may not be able to attach properly to in death or serious injury.
The wheel may bind, walk up or Keep work area clean and well lit. kickback if the power tool is restarted in the workpiece. SKU 45921 for technical questions, please call 1-800-444-3353. Page 3...
Unscrew and remove the Angle Grinder’s Outer Flange, Blade/Disc, and Inner Flange. (See figure A.) note: Depending on the brand/model of your Angle Grinder, there may or may not be an Inner Flange. Page 4 for technical questions, please call 1-800-444-3353. SKU 45921...
Angle Grinder. (See figure c.) note: If your Air Grinder does not require the use of an Inner Flange, insert only the Blade/Disc, and wrench tighten the Outer Flange onto the Shaft. SKU 45921 for technical questions, please call 1-800-444-3353. Page 5...
Safety Guard. Do not use solvents to wipe off the Safety Guard, as damage may result. If necessary, wipe with a damp cloth. You may use a mild detergent. Page 6 for technical questions, please call 1-800-444-3353. SKU 45921...
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 45921 for technical questions, please call 1-800-444-3353. Page 7...