Table of Contents
Advertisement
Quick Links
Wet Stone Grinder
92683
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2005 by Harbor Freight Tools
. All rights reserved.
®
No portion of this manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools 92683
Summary of Contents for Harbor Freight Tools 92683
- Page 1 . All rights reserved. ® No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
-
Page 2: Specifications
There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. SKU 92683 For technical questions, please call 1-800-444-3353 Page 2... -
Page 3: Personal Safety
22. Check for misalignment or binding of moving parts, breakage of parts, and any other condi- tion that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. SKU 92683 For technical questions, please call 1-800-444-3353 Page 3... -
Page 4: Specific Safety Rules
Specific Safety Rules Maintain labels and nameplates on the tool. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear ANSI approved safety impact eye goggles when using the tool. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and other safety equipment are available from Harbor Freight Tools. - Page 5 Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.) Figure B NOTE: The 92683 Wet Stone Grinder uses a non-polarized two-prong plug. SKU 92683 For technical questions, please call 1-800-444-3353...
-
Page 6: Extension Cords
* Based on limiting the line voltage drop to five volts at FIGURE C 150% of the rated amperes. SYMBOLOGY Double Insulated Volts Alternating Current Canadian Standards Amperes Association No Load Revolutions per Minute n 0 xxxx/min. Underwriters Laboratories, Inc. (RPM) SKU 92683 For technical questions, please call 1-800-444-3353 Page 6... -
Page 7: Operation
When unpacking, check to make sure the following parts are included. Grinder Unit with Grinding Wheel, and Angle Guide If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. -
Page 8: Maintenance
Wheel to thoroughly dry before dressing. To dress the Grinding Wheel, hold a dressing tool (available separately from Harbor Freight Tools) or a flat piece of hardened steel (not included) against the Grinding Wheel as it turns. It is important to hold this tool firmly, and supported by the Tool Rest as you are shaping the Grinding Wheel. -
Page 9: Periodic Maintenance
Eventually, the Grinding Wheel may require replacement. The Grinding Wheel should be replaced when it has lost approx. 25% of its diameter. Suitable Grinding Wheels are available from Harbor Freight Tools. Ensure that the replacement Grinding Wheel is no greater than 8” in Diameter nor 1.65” in Width. The bore must be designed to fit a 15/32”... -
Page 10: Parts List
Screw m2, 9 x 19 Flange Screw m4 x 12 Grinding Wheel NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 92683 For technical questions, please call 1-800-444-3353 Page 10... -
Page 11: Assembly Drawing
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABIL- ITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 92683 For technical questions, please call 1-800-444-3353 Page 11...