Suzuki GSX-R1000/A Owner's Manual page 56

Left Footrest and Gearshift Lever
Change the left footrest position and
gearshift lever position as follows:
1. Loosen the two footrest mounting
bolts 1.
2. Move the footrest bracket and
remount it to the desired position.
3. Tighten the bolts to the specified
torque.
Footrest bracket tightening torque:
23 N·m (2.3 kgf-m, 16.5 lbf-ft)
NOTE: Apply a drop of SUZUKI
THREAD LOCK "1342" to the footrest
mounting bolts 1.
 WARNING
Failure to torque bolts and nuts
properly could lead to an accident.
Torque bolts and nuts to the
proper specifications. If you are
not sure of the proper procedure,
have your authorized Suzuki
dealer or a qualified mechanic do
this.
4. Remove the circlip 2 with snap
ring pliers. Remove the gearshift
lever.
NOTE: Replace with a new circlip
when refitting it.
2-44