The LED setting will be changed as follows:
1. White LED Lighting → 2. White LED Brightness → 3. White LED Preset
RPM Setting → 4. Orange LED Preset RPM Range Setting
1. White LED Lighting
White LED
Indicator mark
1. Press and hold the SEL button B and turn on the ignition switch. Keep the
SEL button B pressed for more than 2 seconds.
2. Push the ADJ button 1 to change the lighting mode. The mode changes
as follows: LIGHT → BLINK → NO LIGHT → LIGHT. The white LED
comes on in the LIGHT mode and blinks in the BLINK mode. The engine
rpm indicator mark "" comes on when the mode is in LIGHT or BLINK
mode is selected. When the SEL button B is pushed in the NO LIGHT
mode, the selection mode will be canceled and it will return the normal dis-
play mode.
2. White LED Brightness
1. Push the SEL button B from white LED lighting mode to change white
LED brightness mode.
2. Push the ADJ button 1 to change brightness in 5 steps. The brightness
indicator changes from "
3. White LED Preset RPM Setting
1. Push the SEL button B from the white LED brightness mode to change
white LED preset rpm setting. The white LED will light preset setting and
tachometer indicates preset rpm.
2. Push the ADJ button 1 to change the preset rpm from 5000 r/min to
10000 r/min in step 250 r/min and from 10000 r/min to 13750 r/min in step
50 r/min. When the ADJ button 1 is held in, the preset rpm will advance
continuously.
LIGHT
" (min) to "
BLINK
Blink
2-25
NO LIGHT
" (max).
–
–