Suzuki GSX-R1000/A Owner's Manual page 33

Coolant Temperature Indicator
When the ignition switch is turned to
the "ON" position, the display shows
the test pattern for 3 seconds. Then
the display changes to the coolant
temperature indicator. While the cool-
ant temperature is below 19°C, the
display does not indicate a number
"
but indicates – – –
When the coolant temperature is
higher than 120°C, the display tem-
perature, symbol "" blinks and the
indicator light E comes on. Further, if
the temperature exceeds 140°C, the
display shows "HI", symbol ""
blinks and the indicator light E
remains on. When the coolant tem-
perature indicator light comes on,
stop the engine and check the coolant
level after engine cools.
NOTICE
Riding the motorcycle with the
coolant temperature indicator lit
can cause serious engine damage
due to overheating.
If the engine coolant temperature
indicator light comes on, stop the
engine to let it cool. Do not run the
engine until the coolant tempera-
ture indicator light goes off.
".
Oil Pressure Indicator
When the ignition switch is in the
"ON" position but the engine has not
been started, the symbol "" in the
display and the indicator light E
comes on. As soon as the engine is
started, the symbol "" and the
indicator light should go out.
When the engine oil pressure drops
under the normal operating range, the
symbol "" in the display appears
and the indicator light E comes on.
NOTICE
Riding the motorcycle with the oil
pressure indicator light lit can
damage the engine and transmis-
sion.
If the oil pressure indicator light
comes on, indicating low oil pres-
sure, stop the engine immediately.
Check the oil level and add oil if
necessary. If there is a proper
amount of oil and the light still
does not go out, have your autho-
rized Suzuki dealer or a qualified
mechanic inspect your motorcy-
cle.
2-21