Blade-control Switch (PTO)
The blade-control switch (PTO) is used to engage the electric
clutch and drive the mower blades. Pull the switch up to
engage the blades and release. To disengage the blades,
push the blade-control switch (PTO) down or move a
motion-control lever into the neutral-lock position.
Ignition Switch
This switch is used to start the mower engine and has 3
positions: Start, Run and Off.
Motion-control Levers
The motion-control levers are used to drive the machine
forward, reverse, and turn either direction.
Neutral-lock Position
The neutral-lock position is used with the safety-interlock
system to engage and to determine the neutral position.
Fuel Shut-off Valve
Close the fuel shut-off valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Specifications
Note: Specifications and design are subject to change
without notice.
Width:
48-inch Deck
Without Deck
116.1 cm (45.7
inches)
Deflector Up
137.2 cm (54
inches)
Deflector Down
161.4 cm (63.6
inches)
Length:
48-inch Deck
Roll Bar - Up
201.2 cm (79.2
inches)
Roll Bar - Down
205.5 cm (80.9
inches)
Height:
Roll Bar - Up
179.1 cm (70.5 inches)
Weight:
Model
74901
74915
15
60-inch Deck
134.6 cm (53
inches)
156.8 cm (61.7
inches)
192.2 cm (75.7
inches)
60-inch Deck
211.1 cm (83.1
inches)
215.4 cm (84.8
inches)
Roll Bar - Down
118.9 cm (46.8 inches)
Weight
508 kg (1120 lbs)
569 kg (1255 lbs)