Displaying The Date; Setting The Alarm - Omron HR-100C Instruction Manual

DISPLAYING THE DATE

1. Press the MODE button to select the Time of Day
operating mode.
2. Press the SET button to display the date.
3. Press the MODE button to return to the
Time of Day.
NOTE: If no button is pressed the monitor will
return to the Time of Day after 10 seconds.

SETTING THE ALARM

Press the MODE button to select the
Alarm operating mode.
1. Press and hold the MODE button.
Hour blinking
2. Press the SET button to adjust the
hour. Press the MODE button.
Minutes blinking
3. Press the SET button to adjust the minutes. Press
the MODE button to exit the setting mode. The
Alarm time is set.
ACTIVATING THE ALARM
1. Press the SET button to turn the alarm on or off.
ON
When the alarm is activated, the alarm will go off at
the set time every day. Press any button to stop the
alarm signal.
OFF
9