Kodak i1800 SERIES User Maintenance Manual page 7

5-6
Cleaning the separation roller tires
4. Pull the separation pad holder forward and remove the separation
roller.
5. Manually rotate and wipe the separation roller tires with a roller
cleaning pad. For best results wipe parallel to the ribs in order to
remove any residue between the ribs.
6. Inspect the tires. If the tires show signs of wear or damage, replace
the separation roller. See "Replacement procedures" later in this
chapter.
7. Reinstall the separation roller by aligning the slots on the separation
roller with the holders.
8. Close the pod.
A-61555 May 2010