Kodak i1800 SERIES User Maintenance Manual page 10

Vacuuming the transport
area
Vacuuming under the
background strips
A-61555 May 2010
1. Open the pod.
2. Thoroughly vacuum the entire transport area, paying particular
attention to these areas:
the edges of the transport
the reflective tape near the
front of the pod
1. Using the green tabs pull off the upper and lower background strips
and set them aside.
2. Vacuum the areas where the background strips are adhered to.
3. Reinstall the upper and lower background strips.
the reflective tape near the
front of the transport
the three multifeed sensors at the base
of the transport and the pod
5-9