Recording On A Cassette Tape - Sharp XL-HP888H Operation Manual

" Various tape functions
Side A play-
back
Side B play-
back
Stop
Fast for-
ward/Fast
rewind
Caution:
! To remove the cassette, press the
! If a power failure occurs during tape operation, the tape head will
Downloaded From Disc-Player.com Sharp Manuals
Function Main unit Remote
control
Press in the stop
mode.
Press in the stop
mode.
Press in the playback,
fast forward or fast re-
wind mode.
Press in the playback
or stop mode.
(TAPE ) button, and then
open the compartment.
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.

Recording on a cassette tape

Before recording:
! When recording important selections, make a preliminary test to
Operation
ensure that the desired material is properly recorded.
! SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
! The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
! For recording, use only normal tapes. Do not use metal or
CrO tapes.
Erase-prevention tab of cassette tapes:
! When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
! To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Tab for side B
04/1/27 XL-HP888H(H)E3.fm
XL-HP888H
ENGLISH
Side A
Tab for side A
E-28
TINSZA041AWZZ
8