Pioneer XS-R9 Service Manual page 63

QQ
3 7 63 1515 0
4. Clamp Cam
(1) Remove the Float Base. (Refer to paragraph 3.)
(2) Remove the Gear Pulley and Drive Gear.
(3) Pull it up after you turn the Clamp Cam to the counterclockwise
direction fully.
5. How to Attach the Clamp Cam
(1) Attaches the Clamp Cam with pushing down Lever Switch on
the Loading Base to the loft side.
6. How to Attach the Float Base
(1) It turns Clamp Cam to the counterclockwise direction fully, and
attach the Float Base. (As for the details of the way of turning
Clamp Cam, refer to paragraph 3.)
Remove the Float Base.
7. How to Attach the Tray
(1) Turns the Drive Gear to the counterclockwise direction, and
lowers the Servo Mechanism Assy fully.
(2) Turn the Drive Gear to the counterclockwise direction, and
engage of Drive Gear and the
TE
L 13942296513
(3) Insert the tray.
Note 1: Gear doesn't engage when Servo Mechanism Assy doesn't
fall down even if Drive Gear rotates. Perform step (2) in
this case, and it turns Drive Gear one more time.
Note 2: Servo Mechanism Assy isn't raised fully when Tray isn't
being inserted completely. When it is received, a power
supply is raised to the Servo Mechanism Assy automatically.
www
.
http://www.xiaoyu163.com
mark E of Loading Base.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
REMIX EFFECTOR [EF-R9 (S)]
1. MAIN ASSY (Fig.1)
(1) Remove the Bonnet (three screws of the rear part).
(2) Remove the seven screws
unhook two Hooks
(3) Remove the MAIN ASSY
Q Q
2. Front Panel (Fig.2)
3 6 7 1 3 1 5
(1) Remove the Bonnet (three screws of the rear part).
(2) Remove the two screws
(3) Unhook the two Hooks
Front Panel slide into the front, and remove Front Panel.
Front Panel
D
Right side
co
.
9 4 2 8
A that MAIN ASSY is fixed, and
B . (Fig.1).
.
C
A
MAIN Assy
B
C
B
A
A
A
Fig. 1
0 5 8 2 9 9 4 2 8
D which fixes Front Panel.
which fixes Front Panel, and make
E
Front Panel
E
Hook E Hook
D
Left side
Fig. 2
m
XS-R9
9 9
A
A
A
9 9
63