Omron IntelliSense HEM-775 Instruction Manual page 29

TAKING A MEASUREMENT
4. Press the SET button to confirm the change.
The number of seconds between each measurement is displayed.
NOTE: The default value between each measurement is 60 seconds.
5. Press the MEMORY button (
between each measurement.
The interval can be set to 15 seconds, 30 seconds, 60 seconds or 120
seconds. Continue to press the MEMORY button until the desired
interval appears on the display.
6. Press the SET button to confirm
the setting.
The year flashes on the display.
) to change the interval of time
29