Asus Z97-PRO GAMER Manual page 86

2.7.5 CPU Q-Fan Control [Auto]
[Auto]
[Disabled]
[PWM Mode]
[DC Mode]
The following items appear only when you set CPU Q-Fan Control to [Auto], [PWM Mode]
or [DC Mode].
CPU Fan Speed Low Limit [300 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
disable or set the CPU fan warning speed. Configuration options: [Ignore] [200RPM] [300
RPM] [400 RPM] [500 RPM] [600 RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
set the appropriate performance level of the CPU fan.
[Standard]
[Silent]
[Turbo]
[Manual]
The following four items appear only when you set CPU Fan Profile to [Manual].
CPU Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature. The values
range from 25°C to 75°C.
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum CPU fan duty cycle. The values range
from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan
operates at the maximum duty cycle.
CPU Middle Temperature [45]
Use the <+> or <-> keys to set the value for CPU Middle Temperature. The range of
the values depends on the CPU installed.
CPU Fan Middle Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the CPU fan middle duty cycle. The values range
from 60% to 100%. When the CPU temperature reaches the middle value, the CPU fan
operates at the middle duty cycle.
CPU Lower Temperature [40]
Use the <+> or <-> keys to adjust the CPU fan's lower temperature. The values range
from 20% to 75%.
2-42
Enables the CPU Q-Fan control for 4-pin CPU fan.
Disables the CPU Q-Fan control feature.
Enable the CPU Q-Fan control in PWM mode for 4-pin CPU fan.
Enable the CPU Q-Fan control in DC mode for 3-pin CPU fan.
Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
Sets to [Turbo] to achieve maximum CPU fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
Chapter 2: Getting started