Omron HEM-637 Instruction Manual page 25

How to Use the Graph Function
Push the GRAPH button again to display the
Evening Data Graph.
• Each time you push the GRAPH button,
All, Morning, and Evening data are displayed
in that order repeatedly.
2.
Push the START/STOP button to turn off the power.
How to see the graph
How to see the graph is explained by using the
example of All Data Graph.
When you push the GRAPH button, the latest
measurement results appear in flashing display.
In the example shown to the right, measurement is
made at 10:40 p.m. on January 31. The graph shows
that the systolic blood pressure is 140 mmHg (top of
the vertical bar), the diastolic blood pressure is 95
mmHg (bottom of the vertical bar), and the pulse rate
is 90 a minute ( ).
• The data in flashing display:
When you push the MEMORY button during the graph
display, the details of data in flashing display appear
with the mark. You can also change the flashing
position by pushing or button.
When you push the GRAPH button again,
the graph display appears.
For the people with hypertension:
Display of the graph when the systolic blood pressure is higher than 170 mmHg
• If the systolic blood pressure values that are higher than 170 mmHg are
measured twice, a symbol
170 mmHg) is displayed on the graph.
• If the systolic blood pressure values that
are higher than 170 mmHg are stored
three times, the symbol
and the screen automatically changes
to display the hypertension type graph
(capable of displaying 210 mmHg).
(meaning that the systolic pressure is higher than
disappears
25
Night
Data
Mark
Blood Pressure Values
Date of
Measurement
Month/Days
of a Week
Detail Screen of Data
in Flashing Display
Display screen
where the systolic
blood pressure
values higher than
170 mmHg are
measured twice
Continued
Night Data Graph
(systolic/diastolic)
(mmHg)
Pulse
Rate
Graph Display
Screen of
Hypertension Type