Table of Contents
Advertisement
KNOW YOUR UNIT
TITLE
Heart Symbol
Systolic Blood
Pressure Display
Air Jack
Diastolic Blood Pressure Display /
Pulse Display
Air Plug
(Connects to the air jack)
Air Tube
Green Marker
Carrying Case
ON/OFF Button
START Button
Memory Call Button
Arm Cuff
6
QUICK REFERENCE GUIDE
1. Avoid eating, smoking, and exercising for at least 30 minutes
before taking a measurement.
2. Remove tight-fitting clothing from your upper arm.
3. Sit in a chair with your feet flat on the floor and place your arm
on a table so that the cuff is at the same level as your heart.
4. Put your arm through the cuff loop making sure that the bottom
edge of the cuff is approximately one-half inch above the elbow
and that the Green Marker on the cuff is above brachial artery.
1/2 inch
Green Marker
5. Pull the end of the cuff so that the entire cuff is evenly tightened
around your arm and press the hook material firmly against the
pile side of the cuff.
6. Press the ON/OFF button.
7. After the Heart Symbol (
the Start button, and remain still until the measurement is complete.
8. When measurement is complete, the monitor displays your blood
pressure and pulse rate, and automatically deflates the cuff.
9. Wait 2-3 minutes before taking another blood pressure
measurement. You may require more rest time between readings
depending on your individual physiological characteristics.
TITLE
) appears on the digital panel, press
7
Hide quick links:
Advertisement
Table of Contents
