Omron RX-3 RX-3 Instruction Manual page 13

Maintenance and spare parts
• Use a soft, slightly moistened cloth to clean the
OMRON RX-3.
Caution ! Do not use petrol, thinners or similar
solvents!
• Use a soft, moistened cloth and soap to clean the
wrist cuff.
Caution ! Do not wash the wrist cuff!
Caution ! Do not use petrol, thinners or similar
solvents!
• Do not carry out repairs of any kind yourself. If a
defect occurs consult your OMRON retail outlet or
distributor as mentioned on the packaging.
Calibration
• It is recommended to have the OMRON RX-3
inspected every two years to ensure correct
function and accuracy. Consult your OMRON
retail outlet or OMRON distributor as mentioned
on the packaging.
12
Replace batteries
• Remove the battery out of the battery
compartment and insert two new identical 1.5V
alkaline batteries type AAA LR03 batteries.
Spare parts
• Due to high company quality standards, OMRON
considers the main unit as a non-serviceable part
because the need for proper calibration after
replacement of high tech components.
• If the cuff needs to be replaced have this done by
an authorised expert. Consult your OMRON
retailer or OMRON distributor as mentioned on
the packaging.
Attention ! Disposal of batteries
and the OMRON RX-3 should be
carried out in accordance with the
national regulations for the
disposal of electronic products.
RX-3 English