Using The Auto Clean Function - Samsung AQ09T Series User & Installation Manual

Using the Auto Clean function

Auto clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit. Your indoor unit
evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air.
Using the Quiet function
You can reduce the noise generated from an indoor unit.
16
Press the Auto Clean button.
The Auto clean indicator on the indoor unit display appears and the Auto cleaning

function runs.
When the air conditioner is turned on,
The Auto clean indicator on the indoor unit display appears and the Auto cleaning

function runs after stopping the air conditioner operation.
※ Auto Cleaning time can vary, depending on the previously used mode.
Auto(cool), Cool, Dry mode : approximately 30 minutes.
Auto(heat), Heat, Fan mode : approximately 15 minutes.
Cancel Press the Auto Clean button once again.
• When the air conditioner is turned on, the Auto clean function runs after
stopping the air conditioner operation.
•
lighting in Auto clean mode
Press the Quiet button on the remote controller while the air conditioner is operating
in Cool/Heat mode.
Quiet indicator appears on the remote controller display.

The indoor unit will operate more quietly.

Cancel Press the Quiet button once again.
• If using a multi system, this function will work only when the Quiet function is
set on all operated indoor units.