Sony HAP-S1 User Manual page 93

1. Press and hold
The power lamp flashes three times and then the power turns off.
After a while, the HDD AUDIO PLAYER is automatically rebooted and enters the standby
mode or the Network Standby mode.
Note
If you forcibly shut down the HDD AUDIO PLAYER while music files are being transferred,
the files or setting configurations may not be saved in or applied to the HDD AUDIO
PLAYER.
[93] Dealing with problems/Inquiries
Messages for protecting the HDD AUDIO PLAYER
If the HDD AUDIO PLAYER detects an abnormality inside the unit, one of the following
messages appears for about 5 seconds and then the HDD AUDIO PLAYER automatically
enters the standby mode.
Note
The HDD AUDIO PLAYER enters the normal standby mode, even if the Network Standby
mode is set to [On].
The next time you turn the power on, the volume will be at the minimum.
AMP PROTECTOR
The internal temperature of the HDD AUDIO PLAYER is too high. Turn the power off, remove
any objects covering the ventilation holes and then turn the power on again.
HDD PROTECTOR
The internal temperature of the HDD AUDIO PLAYER is too high. Turn the power off and
remove any objects covering the HDD AUDIO PLAYER. Wait until the HDD AUDIO PLAYER
cools down sufficiently and then turn the power on again.
USB PROTECTOR
An abnormal current is being output to the EXT port on the rear of the HDD AUDIO PLAYER.
Turn the power off, confirm the connection and then turn the power on again.
CPU PROTECTOR
The internal temperature of the HDD AUDIO PLAYER is too high. Turn the power off and
remove any objects covering the HDD AUDIO PLAYER. Wait until the HDD AUDIO PLAYER
cools down and then turn the power on again.
on the HDD AUDIO PLAYER for 5 seconds or more.