Sony HAP-S1 User Manual page 111

before you performed the Factory Reset function, select the backup folder and check
"Watch" in the Contents Settings window of HAP Music Transfer. Go to the Transfer Settings
window and select [Clear] for [Transferred Files List] to delete the transfer history, and then
automatically or manually transfer the files.
Updating the software (Network Update)
You can update the software of the HDD AUDIO PLAYER.
To perform the Network Update function, be sure that the HDD AUDIO PLAYER is connected to
the Internet.
1. Select [Settings] - [Network Update] in the Home screen.
If a newer version of the software is found, a software update notification screen appears.
2. Confirm the current version of the software and the new version of the software, and then
select [OK].
The HDD AUDIO PLAYER connects to the network and starts downloading the new
version of the software.
Installation will start automatically after downloading is complete.
You can confirm the progress status on the screen.
After the software update is complete, the HDD AUDIO PLAYER restarts automatically.
Note
Do not turn the HDD AUDIO PLAYER off or disconnect the LAN cable during the software
update. This may cause a malfunction.
Select [Cancel] to cancel the software update while downloading the software.
If the software update fails, an update error screen appears and the HDD AUDIO PLAYER
may restart.
If you update the software during playback, the playback stops.
The power is automatically turned off.
If the [Auto Standby] function is set to [On], the HDD AUDIO PLAYER is automatically turned
off after it is not operated for approximately 20 minutes.
If the sleep timer function is set, the HDD AUDIO PLAYER is automatically turned off when