Sony HAP-S1 User Manual page 108

Note
The Auto Standby function does not work during the following processes:
Updating the software
Formatting the hard disk drive
Rescanning a hard disk drive
Resetting the product (performing the Factory Reset function)
When the Sleep timer is working
Transferring music files from a computer
Playing music via external input
Hint
When the remaining time until the HDD AUDIO PLAYER enters the standby mode is less
than 60 seconds, the remaining time is shown on the screen.
When the HDD AUDIO PLAYER is in standby mode, you can start the HDD AUDIO PLAYER
by pressing the
PLAYER, or by operating HDD Audio Remote (only when the HDD AUDIO PLAYER is in
Network Standby mode).
Setting the Sleep timer (Sleep)
You can set the Sleep timer. When the specific time you set has elapsed, the HDD AUDIO
PLAYER is automatically turned off.
1. Select [Settings] - [System Settings].
2. Select [Sleep].
3. Set the specific time until the Sleep timer function activates from [Off] (factory default
setting), [00:10], [00:20], [00:30], [00:40], [00:50], [01:00], [01:30] or [02:00].
Note
The Auto Standby function that automatically turns the HDD AUDIO PLAYER off does not
work after you set the Sleep timer.
If the HDD AUDIO PLAYER is set to Network Standby mode, you can operate it through
HDD Audio Remote even after the HDD AUDIO PLAYER has been turned off after the
specific time you set has elapsed.
The Sleep timer is canceled if one of the following operations is performed after setting the
Sleep timer:
button or button on the remote control or the HDD AUDIO