Sony HAP-S1 User Manual page 35

An editing display and keyboard appear.
6. Enter the security key (WEP/WPA).
For details on how to use the keyboard, see "How to input characters."
7. When you have finished entering the security key, select [Next].
8. When the setup is completed, select [OK].
Note
You can enter 5, 13 or 26 alphanumeric characters and/or symbols for a WEP key or 8 to 63
alphanumeric characters and/or symbols for a WPA key.
Hint
If you cannot find the network name (SSID) you want to connect to in step 4, add a new
access point.
[33] Wi-Fi network connections (wireless LAN)
Method 3. Setting up a network connection by adding a
new access point
You can set up a wireless LAN network connection by adding a new access point.
If you cannot find the desired network name (SSID) in the list of available networks, try this
connection method.
Note
This connection method requires information such as the network name (SSID) (*1) of the
wireless LAN router/access point and the security key (password) (*2) for the network.
*1
SSID (Service Set Identifier) is a name that identifies a particular access point.
*2
This information should be available from a label on your wireless LAN router/access point, from the
operating manual, from the person who set up your wireless network, or from the information provided by
your Internet service provider.
1. Select [Settings] - [Network Settings] - [Internet Settings].
2. Select [Wireless Setup].
3. Select [Select access point].
The HDD AUDIO PLAYER starts searching for available access points.
4. When the list of available network names (SSID) is displayed, select [Add a new access