Cleaning The Camera Lens; Cleaning The Camera Body And Image Display - HP Photosmart M417 User Manual

Cleaning the Camera Lens

Do the following to remove any lubricant that has seeped
from the lens wink mechanism onto the camera lens, as well
as fingerprints, dust, and so forth that have accumulated on
the lens.
1. Turn the camera on to open the lens wink mechanism and
to extend the lens.
2. Wrap the lens cleaning paper around the end of the
cotton swab.
3. Using the cotton swab with the lens paper, wipe the lens
clean using a circular motion.
When handling the camera after cleaning the lens, use care
not to press on the wink mechanism cover when the lens is in
the retracted position because this may cause lubricant to
seep from the wink mechanism onto the lens.
Cleaning the Camera Body and
Image Display
Do the following to remove any fingerprints, dust, moisture,
and so forth that have accumulated on the camera body and
Image Display.
1. Blow gently on the Image Display to eliminate dust.
2. Wipe the entire surface of the camera and the Image
Display using a clean, dry, soft cloth.
NOTE: You can also wipe the Image Display with lens-
cleaning tissue.
Caring for Your Camera
161