Transferring Images To A Computer Without Hp Image Zone Software; Using A Memory Card Reader - HP Photosmart M417 User Manual

Transferring Images to a Computer
without HP Image Zone Software
NOTE: If you have a Windows Me, 2000, or XP system, or a
Mac OS X system, you do not need to read this section.
Simply connect the camera to your computer with the USB
cable, and the operating system will launch a program to
help you transfer images.
If you do not, or cannot, install HP Image Zone on your
computer, there are two ways to transfer images from your
camera to the computer: using a memory card reader, or
configuring the camera as a disk drive.

Using a Memory Card Reader

If you are using a memory card in your camera, you can
simply remove it from the camera and put it into a memory
card reader (purchased separately). The memory card
reader acts just like a floppy disk drive or CD-ROM drive. In
addition, some computers and HP Photosmart printers have
memory card slots built into them, and you can use these
memory card slots as you would use a regular memory card
reader to save images to the computer.
Transferring Images to a Windows Computer Using a
Memory Card Reader
1. Remove the memory card from your camera and insert it
into the memory card reader (or the memory card slot in
your computer or printer).
2. Right-click on the My Computer icon on your desktop,
then select Explore from the menu.
HP Photosmart M417/M517 User's Manual
100