Configuring Ftp Communication Settings - Canon EOS-1D X Instruction Manual

Configuring FTP Communication Settings

These instructions are continued from Chapter 1.
22
Turn the <5> dial to select [Address

1
setting], and then press <0>.
If you set the DNS server setting to

2
[Disable], the screen on the left is
displayed.
Press <0> to select the input

position, and then turn the <5> dial
to enter the IP address of the FTP
server.
If you set the DNS server IP address

setting to [Auto assign] or [Manual
setting], the screen on the left is
displayed.
For instructions on screen operations,

see "Virtual Keyboard Operation"
(p.20).
Enter the FTP server's server name

or IP address.
In [Port number setting], enter

3
00021, in most cases.
Turn the <5> dial to select [OK], and

then press <0> to go to the next
screen.