Configuring Eos Utility Communication Settings - Canon EOS 70D Instruction Manual

Configuring EOS Utility Communication Settings

These instructions are continued from Chapter 5.
With EOS Utility, you can use the provided Pairing Software to establish
a connection between the camera and a computer.
Pairing Software is installed automatically during "easy installation" of
the software provided with the camera. If it is not installed, install it on
the computer to be connected to the camera in advance.
The configuration procedure is as follows, using Windows 7 as an
example.
94
1 Select [OK].
First, the pairing screen is displayed.
Press the <U> key to select [OK],
then press <0>. The following
message is displayed.
"******" represents the last six digits of
the MAC address of the camera to be
connected.