Canon EOS-1D X Instruction Manual page 18

Configuring Network Settings
Completing Settings for the Communication Method
The following instructions are for setting screens that vary depending
on the communication method (FTP Transfer, EOS Utility, WFT Server,
or Media Server), as shown below. Read the page that describes the
selected communication method.
FTP trans.
EOSUtility
Users of EOS Utility Ver. 2.13 or Earlier in Windows
Before performing the operations described from page 43, perform the
operations below. If these operations are not performed, the Pairing
Software described on page 44 may not start.
Open the [C Drive]  [Program Files]  [Canon]  [EOS Utility] 
[WFTPairing] folder (in this order), and then double-click the [WFT
FirewallSettings] icon. (This folder name is only an example. The folder
where files are saved varies depending on the computer environment used.)
After performing this operation, perform the operations described from
page 43.
18
Chapter 2 (p.21)
Chapter 3 (p.43)