Creating and Registering Captions
Follow these steps to create captions and register them on the camera,
as described in "Adding a Caption Before Transfer" (p.32). When
creating and registering captions, use a computer on which EOS Utility
is installed.
Before you start, use the USB cable provided with the camera to
connect the camera to the computer. For instructions on connecting
the camera to the computer with the USB cable and starting EOS Utility,
refer to the PDF Software Instruction Manual on the EOS Software
Instruction Manuals Disk (CD-ROM) provided with the camera.
When Using EOS Utility 2 or Earlier
100
Start EOS Utility and select
1
[Camera settings/Remote
shooting].
The camera settings/
remote capture screen is
displayed.
On the [
2
Captions].
The screen for caption creation is
displayed.
] tab, select [WFT