Standby (Power Off) - Yamaha MCR-E810 Service Manual

RX-E810/RX-E410/NX-E800

3.3 Standby (power off)

(1) System standby
The power supply through AC outlet of RX is shut down in system standby (power off).
The microcomputer of the unit connected with AC outlet of RX cannot work after system power off.
When there is processing that should be finished before the system power off, the system is turned power off
after such processing completion.
RX "STANDBY/ON"
key operation
(2) Unit standby (power off)
Each unit can be individually standby (power off) with an individual "STANDBY/ON" key of each unit.
DVD/CD "STANDBY/ON"
key operation
56
RX unit
[Power on state]
POWER_OFF command
PORT_PRE_STANDBY
Standby process
PORT_STANDBY
Shut down power supply
through AC outlet
Transition process to
standby state
RX unit
PORT_PRE_STANDBY
PORT_STANDBY
DVD/CD unit
[Power on state]
Standby process
Standby process complete
DVD/CD unit
[Power on state]
Standby process
Standby process complete