6. PROTECTION HISTORY
Four protection histories are displayed.
6-1 No PRT
6-4 No PRT
7. PROTECTION HISTORY RESET
The PROTECTION history is initialized. Select [HIST RE-
SET] and press the "MEMORY" key, and the PROTEC-
TION history will be initialized.
HIST DISP
HIST RESET
HISTORY DISPLAY
The RAM is not initialized. The past PROTECTION history
is not erased.
HISTORY RESET
The past PROTECTION history is erased. Have HIST RE-
SET displayed and press the 'MEMORY' key, and the past
PROTECTION history will be erased.
8. MUTE
Using the sub-MENU, select the MUTE status of SP
(Speaker out)/HP (Phones).
MUTE OFF
SP MUTE ON
HP MUTE ON
The MUTE function of SP
( S p e a k e r o u t ) a n d H P
(Phones) is turned OFF.
The MUTE function of SP
(Speaker out) is turned ON.
The MUTE function of HP
(Phones) is turned ON.
9. TURN OFF THE POWER FACTOR HISTORY
Up to 5 past factors which caused the power to turn OFF
are displayed.
When the "MEMORY" key is pressed during display, the
history of the power OFF causal factors are initialized.
9-1 NO HISTORY
9-5 NO HISTORY
Display
9-x CPU RESET
9-x POWER DOWN
9-x PROTECTION
9-x TIMER OFF
9-x PANEL KEY
9-x REMOCONKEY
9-xAUTOSTANDBY
9-x NO HISTORY
RX-E810/RX-E410/NX-E800
Factor
Microprocessor reset
Power down
Protection
Sleep/Timer off
Panel key
"STANDBY/ON"
Remote control key
"STANDBY/ON"
Auto standby
Not history
15