2. Command and Operation Key Code
The system command and the system remote control code described as follows are transmitted through RX command
bus.
2.1 RX request command
Name
POWER_ON
POWER_OFF
PLAY
STOP
DIMMER_ON
DIMMER_OFF
VFD_OFF
RX request command is not transmitted if DVD/CD is already in the state that RX requests.
2.2 Operation key code (DVD/CD unit)
Key codes which are described at previous "REMOTE CONTROL, • KEY CODE" page are transmitted from RX
unit to DVD/CD unit when user operate the system remote control unit.
Code
Function
to DVD
to CD
7C-F6
78-7E
Power on request
7C-F7
78-7F
Standby request
7C-82
78-02
Playback request
7C-85
78-01
playback stop request
78-FE
78-FE
Display dimmer(decrement of brightness) request
78-FF
78-FF
Cancel display dimmer.
78-FD
78-FD
VFD turn off request
RX-E810/RX-E410/NX-E800
53